FACEAL HYDRO RFNew concrete protection against water, chlorides, carbonation and reinforcement corrosion. ............................................................................................................................................................. |
|
|||||
| Faceal Hydro RF is a colourless, solvent-free impregnation product designed to provide in-depth protection of concretes and materials of mineral origin against water, humidity, chlorides, carbonation and corrosion. Faceal Hydro RF penetrates up to 5 cm. | ||||||
|
|
|
|||||
SPECIFICATIONS.......................................................................................................................................................................................................................... |
||||||
| Color : Colourless | Odour: None | PH : NC | ||||
| State : Liquid | Density :0.88 | Boiling point : 186C | ||||
DOCUMENTATION.......................................................................................................................................................................................................................... |
||||||
 |
 |
MSDS sheet | |
Technical sheet | ||
|
Test report |
|
||||
| |
||||||
PROS.......................................................................................................................................................................................................................... |
||||||
 |
Long term efficiency > 15 years. | |
Effective under high humidity conditions. | |||
|
Efficient in only a few hours! | |
Protection against chemical or biological agents that are water soluble (particularly chlorides). | |||
|
Permeable to water vapour. | |
Highly resistant to alkaline substances. | |||
|
Non film-forming: does not affect the mineral appearance of surfaces. | |
Ready to use. | |||
|
Very good penetration. | |||||
USER GUIDE.......................................................................................................................................................................................................................... |
||||||
 |
Shake the container well before use. | |||||
|
The surface must be dry, clean and free of any trace of oil, grease, cleaning product, dust, efflorescence, paint or any other substance liable to prevent the correct penetration of Faceal Hydro RF. | |||||
|
Faceal Hydro RF can be applied either with a brush or with a low-pressure sprayer with a Viton seal. | |||||
|
Apply1 to 3 coats until saturation which will vary due to the degree of exposure to weather and abrasion. In exceptional cases (tide, marine environment...), Faceal Hydro RF must be applied in 3 to 6 coats. |
|||||
|
Faceal Hydro RF can be treated or covered 4 hours to 1 day after application by a protection product Faceal Colour. | |||||
Call us for pricing: (514) 648-9198
